Thursday, October 15, 2009

Triple Sweet Treats

Here's a project inspired by Deann (www.stampwithdeann.blogspot.com). She has easy directions to follow to make this project. I made some tweaks for this project. My theme is Halloween - and yup, still have a little Cast-a-Spell Designer Paper (almost out!).

Back:

By pulling the tag, the candy can be easily retreived.

To make this treat project:
(1) 8-1/4" x 6" Lovely Lilac CS, score on 8-1/4" side @3"
(3) 2" x 3" tag in Only Orange
(3) Round tab punches in Only Orange


Ink the Batty Jumbo Roller with Black ink, roll along the top edge revealing only "scardy cat - trick or treat" . Punch through both layers of Lovely Lilac using the 1-3/4" Punch, 1/2" from each edge, punch center hole last. Adhere 1/2" strip of Cast-a-Spell Designer Series Paper at bottom 1/8" away from the Fold line.

Turn paper over, secure Sweet Cups with mini Glue dots to Lovely Lilac CS. Do not remove the adhesive from the back of the Sweet Cups. Adhere Sticky Tape along the right and left edges and in between the Sweet Cups. Fill cups with candy - the center one has a plastic spider.


Remove Sticky Tape (not the ones on the Sweet Treats). Fold over the other hald of the treat golder. Insert the Only Orange tabs. Adhere die cut letters "EEK" on the Round Tabs. Your project is complete.
Supplies:

  • Stamps: Batty Jumbo Wheel
  • CS: Lovely Lilac, Only Orange, Cast-a-Spell Designer Series Paper
  • Ink: Black
  • Accys: Sweet Treat Cups, 1-3/4" Circle Punch, Round Tab Punch, Big Shot Sizzlets Decorative Strip Naturally Serif Die, Sticky Tape, Mini Glue Dots.

Thank you for visiting today..................HUGS!!!

Wednesday, October 14, 2009

Spin & Floating Candy Corn

Finally a card! Not just any card: the candy corn spins (on 2 pennies): FUN! . Colors used are the new SU "IN" colors. There's also a surprise inside (of course)! See below.

The Candy Corn is floating on acetate.

Here's another view:

Here are the pieces for this card:
(1) 5-1/2" x 8-1/2", score at 4-1/4", stamp Itty Bitty Backgrounds with Crushed Curry Ink
(1) SU Exclusive Big Shot Top Note Due, stamp candy corn with Versamark Ink
(1) 3-5/8" x 1-1/4" Whisper White CS, use 3/16" Corner Punch on all corners
(1) 3-7/8" x 1-1/2" Crushed Curry CS, use 3/16" Corner Punch on all corners
(4) 1-1-1/4" Circle Punch: 4 Candy Corns
(4) 1-3/8" Circle Punch: (1) in Crushed Curry, (3) Dusty Durango
(2) 1/2" x 5-1/2" Whisper White, center and stamp "Yum"
(1) 1-3/4" Circle Punch in Clear Acetate
To make the Spinner, use a pencil to lightly mark 3/4" from the center tip, 3/4" from right and left edge.
Use this guideline to punch (Word Window Punch) the slider.
Prepare to have (2) Pennies: Adhere (1) dimensonal and position through the punched window, as shown. Remove back of dimensionals and place the end Penny on top. With a glue dot, adhere (1) of the candy corn on top.

Turn the top note over, adhere dimensions, as shown. Remove adhesive and attach to the front of the card.
To make the inside:
Adhere the (2) 1/2" strips 1/4" away from the top/bottom edge.
Cut into the 1-3/4" acetate in a circular motion. Adhere one of the candy corn to the bottom inside card, as shown.

Position the Candy Corn for the top inside, as shown (tip: make sure it is positioned with the back side showing). Apply adhesive to the back, then close the card. The top/bottom spring is positioned correctly. The last step is to adhere the last Candy Corn.

Supplies:
  • Stamps: Tasty Sweet
  • CS: Dusty Durango, Crushed Curry Whisper White
  • Ink: Versamark, Crushed Curry, Black
  • Accys: SU Exclusive Big Shot Top Note die, Word Window Punch, 3/16" Corner Rounder Punch, 1-3/4" Circle Punch, 1-3/8" Circle Punch, 1-1/4" Circle Punch, Stampin' Write Pens: Dusty Durango, Crished Curry, So Saffron, Dimensionals, Acetate (non SU)

Thank you for stopping by today to visit...............HUGS!!!

Tuesday, October 13, 2009

Petal Treat Holder

Petal Treats! Simple!!! Really!!!!These treat holders use the Big Shot Petal Card Die. They are perfect to tuck those Halloween candy miniatures. Those small Designer Paper scraps are from the Cast-a-Spell Designer Series paper - A little stamping and Mix & Match the scraps of paper and they look great. yup, I still have a small amount left over! Finished Project size: 2-1/2" x 4".


Here are those individual treats:





This is what the Big Shot Petal Card Die looks like after cutting. See the contrast Designer paper isn't long enough? It's OK - it will be covered by the Punched Scallop circle. Stamp "yum" on the inside flap. Stamp 3 of the outside flaps with the Tasty Sweet Large & Small Swirl and Candy Corn stamps.

Supplies;

  • Stamps: Tasty Sweet , Batty for You
  • CS: Cast-a-Spell Designer Paper. Only Orange, Black, Lovely Lilac, Old Olive, Whisper White
  • Ink: Black, Only Orange, Versamark, Lavender Lace, Old Olive, Craft White
  • Accys: SU Big Shot Petal Card Die, Scallop Circle Punch, 1-3/8" Circle Punch, 1-1/4" Circle Punch.

Thanks for visiting today........................HUGS!!!!!

Monday, October 12, 2009

More Book Treat Holders

More versions of the Book Treat Holder previously posted on Friday, Oct. 9 on my blog. Measurements for this project are posted on Oct. 9 along with assembly details. I am really trying to use up the Cast-a-Spell Designer Series Paper ....can you tell? These projects are perfect for that purpose. A Punched Witch, a Punched Spider, and a Punched Pumpkin is shown. Close-up of each one is below:

#1: Miss Witch Book Treat Holder: Note: outside and inside front cover are cut the same size.
(1) Small Oval Punch in Old Olive for Face, use Black Stampin' Write Pen for mouth, adhere dimensional
(1) Sliver of Old Olive for Nose, use Real Red Stampin' Write Pen for "mole"
(1) Small Oval Punch in Lovely Lilac, cut in half for brim of hat
(1) cut 3/4" x 1-1/8" triangle Lovely Lilac for hat, adhere dimensional
(1) Large Oval Punch in Black
(1) Oval Scallop Punch in Only Orange, adhere dimensionals
(2) 1/4" Circle Punch in Whisper White for eyes, use Real Red Stampin' Write Pen

Side view of Miss Witch:

Close up of Miss Witch:

#2 Pumpkin Book Treat Holder: Note: Outside DS paper front cover is cut 1/4" smaller
(5) Small Oval Punched in Only Orange, Sponge edges with Only Orange Ink, add dimensonals to back
(2) Strips of 1/8" wide x 2" long, curl using the piercer, adhere to back of pumpkin
(1) scrap of Close to Cocoa for Pumpkin Top
Tear a strip of scrap Close to Cocoa for the Pumpkin to sit on, position underneath Pumpkin.

Side view of Pumpkin:

Close-up of the Pumpkin:

#3 Spider Book Treat Holder: Note: Outside DS paper front cover is cut 1/4" smaller
(1) Round Tab Punch behind spider, add dimensionals after stamping
(1) 1" Circle Punched in Black CS
(2) Small Oval + Large Oval Punched in Black CS for the legs. Cut in half and cut again in half.
(2) 1/4" Circle Punch for eyes, use Black Stampin' rite Pen for pupils
(1) Modern Label punched ins Real Red CS, adhere to cover with dimensionals
(1) Word Window Punch for message

Side view:

Close-up of spider:


Supplies:
  • Stamps: Itty Bitty Background, Sweet Treats, The More the Merrier
  • CS: Cast-a-Spell Designer Series Paper, Black, Whisper White, Lovely Lilac, Only Orange, Real Red, Old Olive, Close to Cocoa
  • Ink: Black, Only Orange, Craft White, Lavender Lace
  • Accys: SU Exclusive Big Shot Matchbox Die, Horizontal Slot Punch, Small Oval Punch, Large Oval Punch, 1" Circle Punch, 1/4" Circle Punch (retired) Modern Label Punch, Word Window Punch, Round Tab Punch, Scallop Oval Punch, Real Red and Black, Stampin' Write Pen, Dimensionals, Sticky Tape, Piercer.

Thank you for your visit today. Hope you enjoyed this post......................HUGS!

Friday, October 9, 2009

Book Style Treat Holder

Here's a quick posting for this project........looks like a book from the outside but it is a treat holder. Original concept is from Mary K. Part of this project is using the Stampin' Up Exclusive Big Shot Matchbox die! Here's my version ( Yay! No Velcro!)


Inside book:

Measurement for the cover: (1) 5-1/2" x 3-1/4" Solid CS and DS paper. For this particular project, DS is cut 5-1/4" x 3" (due to limited DS scraps on hand AND that is why finished project has a black CS frame on the cover) - I kinda like it.

These are the (3) main pieces needed for this project. Other pieces needed are:
(1) 1/2" x 4" strip in Lovely Lilac Solid Card Stock (paper) - It's NOT ribbon, but try it with ribbon!
(1) Small Oval Punched Designer paper
(1) Large Oval in Lovely Lilac
(1) Black CS Decorative Frame (from the SU Exclusive Big Shot Matchbox Die)

Assemble Box. Apply Sticky tape to the following pieces: Back of box, 1" of the 1/2" x 4" Lovely Lilac strip. Add Dimensionals to the Lovely Lilac Oval and the Die cut Decorative frame.

Lightly mark with a pencil edge of the box and middle of the length of the cover.

Using the Horizontal Slot Punch as shown, punch through the pencil mark. Make sure opening is at least 1/2" to fit strip.

Remove the strips of Sticky Tape from the box bottom. Position the 1/2" strip of Lovely Lilac in between cover and box, leaving the strip to be 3" long. Secure box to back cover. Close front cover, thread 1/2" strip through Horizontal slot and underneath the Black CS decorative die frame.

Supplies:
  • Stamps: None
  • CS: Cast-a-Spell Designer Series Paper, Black, Lovely Lilac
  • Ink: None
  • Accys: SU Exclusive Big Shot Matchbox Die, Small Oval Punch, Large Oval Punch, Horizontal Slot Punch, Sticky Tape, Dimensionals

Thank you for stopping by to visit................HAVE YOURSELF A GREAT WEEKEND!