Thursday, October 1, 2009

Batty for You

Updated 10/2/09: Bat template can now be printed at full size scale by clicking on it. You will need to change the printing to "landscape" and also increase the margins as far as possible to obtain the full template.
Here's the Bat sleeping - the message on the wings is a rub on from Spooky Treats Rub On. The finished size for this project is 3-1/2" x 5-3/8". When the wings are opened, the card is 10-1/2" x 5-3/8".

Open up the wings.......she is still a little sleepy! Sweet candy corn in the middle.

Here's a close-up: The mouth is hand drawn using a White Gel Pen. For the "OR", on a scrap of acetate, use a Versamark Pen on stamp, apply White Embossing Powder and quickly heat (don't over heat this!). When cooled, use 1/2" punch, adhere using a mini glue dot on top of the Sweet Treat Cup. Want to see how to make the words around the Sweet Treat Cup? See below.


On the left wing: with the Versamark Pen, apply White Embossing powder on "trick" of the stamp.


On the right wing: with the Versamark Pen, apply White Embossing Powder on "treat" of the stamp.


Back of the Bat reveals how to get the Candy Corn: lift up the tab as shown.


HERE'S HOW TO MAKE THIS BAT TREAT:

Today is a Lucky day!!!!! I was able to get my DH (Darling Honey) to scan the template for this Bat. Print it out and it should be "full size" to be used. The original pattern came from Karen at last week's SU gathering: thank you, Karen so much for sharing.

Supplies for Bat:

(1) Cut out the bat using Black CS. Use Circle Scissor Plus to cut out center for Sweet Treat Cup. Tip: If the bat is folded in half, you can use the 1-3/4" punch.
(2) 1/2" Whisper White CS for eyes
(1) 1/2" Basic Grey Eyelids: to be cut in half, sponge with Black Ink
(2) 1/4" Black Circles for eyes, Use White Gel pen (see photo)
(2) Basic Grey "ears" - no template for this (optional), sponge with Black Ink
Supplies for Back Candy door:
(1) Round tab Punch in Black CS
(1) 2" x 2-1/4" pull up door, attach Round Tab to this
(1) 2-1//2" x 2-1/2" Back, use 1-3/4" Punch on this piece

Apply Craft White ink using a sponge to the Bat inside and outside wings

Apply the Rub On to the front left wing


Look what I did - yeek! When I mount my stamps, I wrap the entire piece of wood using Packaging Tape. This allows me to remove the rubber stamp. Well, this is one of those occasions where I did remove the stamp, positioned it in a half circle on a clear acrylic block. Versamark and White Embossing powder was used for the words. It Worked!!!!! A sigh of relief!


Now I need to secure the Sweet Treat Cup - here I applied 2 Way Glue Pen to see if it works:


Well, it didn't work - so I used sticky tape and YES, that worked.


Now for the back: Apply dimensionals to 3 sides of the 2-1/2" x 2-1/2" Black CS as shown after using the 1-3/4" punch.


Ensure the "door" fits after the dimensionals are applied around the 3 sides. Then apply both pieces on top of the Sweet Cup opening..........Single knot a small piece of Pumpkin Pie Grosgrian ribbon, attach with a mini glue dot. Your project is now complete.


Supplies:

  • Stamps: Tasty Sweet
  • CS: Black, Basic Grey, Whisper White
  • Ink: Versamark, Black, Craft White
  • Accys: Spooky Treats Rub-Ons, SU Exclusive Sweet Treat Cup, 1-3/4" Punch, 1/2" Circle Punch, 1/4" Circle Punch or Crop-O-Dile, 1/4" Pumpkin Pie Grosgrain Ribbon, Mini Glue Dot, White Gel Pen, White Embossing Powder, Dimensionals, Sticky Tape, 2-Way Glue Pen, Circle Scissor Plus, Stamping Sponges, scrap acetate (non SU)

Thank you for stopping by today..........................HUGS!!!

Wednesday, September 30, 2009

The Mummy is Updated

This is an updated Mummy card. Last year's card was simpler (torn and sponged). This updated one is water sprayed and crumpled giving this Mummy more "character". I was thinking of the Mummy movie when I made this card so the spider is crawling up from the corner. Like those cross hatch marks. Cool, eh?

Close-up of Mummy: see the cross hatches - they were made using a Stampin' rite Pen. The eyes are adhered to the card front using Pop-Up Dot. Get these from your local craft store.
Check Spelling
Top view of card:

When the card is opened, the message will spin and then reveal "BOO" message:

Card inside showing "YEEK" message:

Card right and left side:

To achieve that Mummy look: Spray strips of Whisper White CS with water, crumple, and unfold.

Position torn pieces on card front

Use Close to Cocoa to sponge card front edges and all torn pieces. Note: Sponge inside edges all the way around as well as card inside.
Inside spin mechanism:
  • Cut (1) 5" x 5-1/4" in Close to Cocoa, score 1/2", 2-1/2, 4-1/2"
  • Cut center out: 5/8" away from the top and bottom, 3/4" away from the center fold

Stamp and cut out spiders. Add dimensionals behind and set aside.
Position Linen thread in the middle of the underside of the message. Apply sticky tape as shown to the top and bottom. Apply adhesive to the sides. Then sandwich the two pieces together.
Position inside message, secure with transparent tape. Apply sticky tape to the 1/2" edges as shown.
Remove sticky tape from the right side. Position edge 1/2" away from the middle fold line, adhere. Repeat same procedure for the left side.
Cut (2) Whisper White CS 3-1/2" x 5-1/4" for the right and left card inside. This will provide stability to the card. Sponge edges as well as inside areas with Close to Cocoa.
Lastly, position cut spiders. Use Black Stampin' Write pen as shown and you have completed the project.
Supplies:
  • Stamps: Batty for You
  • CS: Whisper White, Close to Cocoa
  • Ink: Close to Cocoa, Black
  • Accys: SU Exclusive Big Shot Billboard Alphabet Die, Stampin Sponge, Close to Cocoa and Black Stampin' Write Pen, Dimensionals, Sticky Tape, Linen Thread, Pop-Up Glue Dots, Googlie Eyes (non SU)

Thank you for stopping by to visit today................Hugs.................

Tuesday, September 29, 2009

Lovin the Holidays

I was soooooooo lucky to participate in a Manager's Meeting this past weekend. A great group of gals who are way so creative and totally inspiring. There was so much enthusiasm in the air - great atmosphere! I shared my card posted yesterday: Xmas Message for You. The following card was created by the hostess (Patricia). Highlight of this card is the technique used for this card: Stamp the leaf with Versamark, add Clear embossing powder, heat, then using daubers: apply Shimmer Paint. Then cut out and pop with dimensionals. Cool, eh?

Here's a closer look at the leaves with the Shimmer Paint:

Bev created this card using the items from the Hol Mini: highlight of this card is the Big Shot Die Cut Buttons threaded with Silver Elastic cord and popped with dimensionals. Tip: be sure to back the DS with chipboard before putting through the Button die for stability. Love that Christmas Cocoa Specialty Designer Paper. The Eyelet Boarder Punch used adds a nice finished touch. Check out Bev's blog: http://www.stampinalldaywithbev.blogspot.com/ where she has waaaay more great cards!

Denise created this soooo cute little gingerbread person - it was really tempting to take a "bite" out of his.........???? This gingerbread is all made from Punches: Word Window, Tag Punch, 1-1/4" Circle. And of course, the SU Exclusive Big Shot Top Note die is in the background, edges sponged with Real Red. Notice the Sassy Sparkles Jumbo Roller used on the Real Red CS, too? How about a Gingerbread Family? It's coming soon to your blog!

Linda shared this one - Highlight of this card is the SU Exclusive Mover & Shapers Curly Label Die and water coloring the tree popped with a dimensional That red ribbon: it's the reverse side of the 3/4" Polka Dot ribbon...........cool, eh? Eyelet Boarder Punch at the bottom finishes off this card.

Brenda created this perfect Fall card using the Autumn Splendor Stamp Set from the Hol Mini. Lovin all the colors and the flexibility of this stamp set. The leaf is popped with a dimensional.

Monica created this AMAZING card! It is using the SU Exclusive Final Press Embossing Folder which provides the textured backdrop for this Christmas collage. We voted this the BEST card!!!! That red ribbon: yes, it is the reverse side of the Polka Dot ribbon. The pointsetta/leaves: it is the 5 Petal Flower Punch. The ornament is from the Hol Mini (Delightful Decorations) and the Ornament Punch is used for the perfect punching.

Here's a closer view of this AMAZING card:

Karen created this amazing card: Love the soft colors for this card - see the glitter on each one? 2 way glue pen was used to apply the glitter. That White CS - it's the special Shimmery White CS. The special Holiday Mini Mistletoe Ribbon Originals adds a finishing touch.

Sigh..........a closer look still doesn't show the glitter on the ornaments.

This was such a fun event to attend. I am looking forward to the next one.

Thank you for stopping by today................Hugs!!

Monday, September 28, 2009

Xmas Message for You

9/29: Updated this posting with photo & measurements for inside card - see below
Here's a Christmas message card that has a surprise inside. The outside is using the fabulous new Stamp set from the Holiday Mini and the Ornament punch. Pair it with the Big Shot Decorative strip die and it looks great!

Card front close-up:

Card Inside with "Peace & Love" message along with die cut snowflakes (also in the Holiday Mini Catalog).

Top view of card:

Some of the parts to make this card: (corrected measurements below 9/29 in red)
  • (1) 5-1/2" x 8-1/2" Real Red CS, Score 4-1/4"
  • (1) 5-1/4" x 8-1/2" Christmas Cocoa DS paper, score 3-1/2", 4-1/4", 5" (inside- see photo below)

  • (1) 5-1/4" x 4" Whisper White CS (outside)
  • (1) 5" x 3-3/4" Christmas Cocoa DS Paper (outside)
  • (3) 1-3/4" x 3-3/8" Real Red CS (inside tabs)

Left Photo: Here's a cool trick: Use the cut 4" x 5-1/4" Whisper White CS to stamp and punch the ornament in Brown Suede. Tip: be sure to stamp and punch a min of 1/4" away from the card edge. Use this punched Whisper White piece under the cut 3-3/4" x 5" Flocked CS. It will be hidden!
Right Photo: Position paper clip, then apply dimensional as shown. Apply dimensional to each side of the ornament. Tie a single knot ribbon through paper clip.

Left Photo: punched ornament will go on top of Flocked CS
Right Photo: apply die cut "Cheer" with 2 way Glue Pen

Left Photo: Position inside die cut words and stars, apply to tabs using 2 way Glue Pen
Right Photo: Apply adhesive to DS right side and adhere to right inside 1/4" away from card edge

Left Photo: Apply adhesive to DS left side and adhere to the left side 1/4" away from card edge
Right Photo: finished left inside
Last step: Adhere tabs as shown in the 3rd photo above.
Supplies:
  • Stamps: Delightful Decorations
  • CS: Real Red, Whisper White, Brown Suede, Christmas Cocoa Specialty Designer Series Paper
  • Ink: Brown Suede
  • Accys: SU Exclusive Big Shot Join in the Cheer Decorative Strip Die, SU Exclusive Merry Details Sizzlits Die, Ornament Punch, White Tafetta Ribbon, Dimensionals, 2 way Glue Pen, Paper Clip (non SU)

Thank you for stopping by today..............hugs!