Saturday, September 12, 2009

Spooky Halloween Tree

This is my Halloween Pop Up Tree project - it turned out much better than I anticipated. This is the special SU die that is in the Holiday Mini Catalog..............love it! I even broke into and used those Rub-Ons ( Spooky Treats pg 177). Finished card is 6"x6".

Front of card close-up:

Top view of card inside:

Card inside front view: "spooky" is also a rub on - a small part of the rub on is used and punched with the word window. Baroque Motifs stamped in black used on Lovely Lilac CS.


When the card is flat - it looks great!


Here's a close-up of the inside right side - the left side is also the same. The DS is cut 2-1/8" x - 5-3/4", the white CS is 1/4" wide x 5-3/4"

The tree!

To make this project, the front supplies used. Note: I cut out the rub on to position it on the card first.

Attach the die cut swirl by using the 2 way glue pen.....it works great!

Here are some of the inside pieces used:

SU Exclusive O Christmas Tree Big Shot Die: cut the trees as indicated on the instructions

This is how those skull medallions were made (using DS scraps, of course). After assembly, pop the medallion with a dimensional - 5 medallions are needed.
Supplies:
  • Stamps: Baroque Motifs
  • CS: Cast-a-Spell Designer Paper, Whisper White, Black, Lovely Lilac,
  • Ink: Black
  • Accys: SU Big Shot O' Christmas Tree Pop-Up die, Big Shot Swirly Decorative Strip Die, Spooky Treats Rub Ons, Word Window, Modern Label Punch, 1" Circle Punch, 3/4" Circle Punch, Star Punch, 5/8" Old Olive Grosgrain Ribbon, Dimensionals, Sticky Tape

Love to see yours if you make this project............thanks for visiting today........another pop-up coming soon! HUGS!

Friday, September 11, 2009

It's Scary! A Pop-Up Spider

Updated: I figured out how to photgraph this.....so here are way better photos. I also added Cast-a-Spell DS to the inside right side - otherwise, it looked a little "lost". Finished card size 6x6.
This project was a challenge to photograph - it budges all over. You'll see why in the next photos. It is amazing to make! This is my first Pop-Up Ball project. Here is the front of the card:

And when the card is opened............a large pop-up spider. Scared You! The "scared" is also using the Billboard Alphabet Die attached using the 2 way Glue Pen.

Googly eyes attached with Tombow Glue. They are a nice touch!
Look at the top view - see how it bulges......................

Here's "BOO" using the Exclusive Billboard Alphabet die. Attach with 2 way Glue Pen.


Here are the little spiders. They also have googly eyes attached with Tombow adhesive.

Here's a close up of the large spider with larger googly eyes. The legs are attached to the top of the Hexagon and then sides are attached. Follow the instructions that come with the Pop-Up die to cut and assemble the 3D Ball.

Side view of spider. It sits on a scallop circle. Remember, the large spider can turn since it has a brad in the inside center. The Cast-a-Spell strip (the measurement is 2-1/2 X 5-3/4) is missing in this photo.

Here are some of the cut pieces used (note: 2 strips of DS used on the inside card - only 1 shown in photo):

A "trial" spider was made before the project began. Here it is using scrap paper.

Supplies: (All supplies used are SU unless otherwise noted)
  • Stamps: Batty for You
  • CS: Cast-a -spell DS, Black, Lovely Lilac, Only Orange, Whisper White
  • Ink: Black
  • Accys: Big Shot Pop-Up 3D Ball, SU Exclusive Billboard Alphabet Due, Big Shot Scallop Circle, Small Oval Punch, Large Oval Punch, Wide Oval Punch, 1/2" Circle Punch, 3/4" Circle Punch, Scallop Punch, 1-3/8" Circle Punch, 1-1/2" Circle Punch, 1/4" Grosgrain Ribbon (retired), Googly Eyes (non SU), Dimensionals, Sticky Tape, Silver Brad, Piercer, 2 way Glue Pen.

Thank you for stopping by today to visit - hope you will try this Pop-Up Ball! I loved making it! Hugs..............

Thursday, September 10, 2009

Halloween Surprise Card

Now here's a card that does everything! It's called a Marvelous Magical Marquee Card. See Jan Tink's blog (http://www.stampspaperscissors.typepad.com/) for her video tutorial posted on 8/29/09 for this card - it's absolutely the BEST! I've added my own twist to this card. This Halloween card has those spiders peeking in the front.

Open the card and you will see the stamped spiders of each side, then open the card all the way and another message is revealed. Cool, eh?

Here's what is used to make this card:
(1) 8-1/2" x 5-1/2" Dusty Durango CS, score 2-1/8" each side
(2) 2" x 5-1/2" Cast-a-Spell DS
(1) 3" x 5-1/4 Cast-a-Spell DS
(2) 3-1/4" x 2-1/2" Lavender Lace, score one side 1/2" along the 2-1/2" side.
(1) 2-7/8" x 3-1/8" Lavender Lace
(1) 2-1/2" x 1-1/4" Dusty Durango
(1) 2-1/2" x 1-1/4" Dusty Durango
(1) 2-1/4" x 1" Whisper White
+Scrap Lavender Lace
After scoring Dusty Durango, adhere 2" x 5-1/4" Cast-a-Spell DS to each side of the front. Note: DS should be aligned to the front center edge. Next photo: Stamp image using Dusty Durango Ink onto Whisper White CS, trim as shown. Use 1-1/2" punch to punch out "eek". Attach "eek" to punched 1-3/4" Lavender Lace circle. Set aside.

Adhere stamped Dusty Durango image on top of solid Lavender Lace CS. Lightly mark opening with a pencil. Find center of circle and cut, then punch opening using 1-1/2" punch (see photo on the right below). You will NOT be able to use the 1-1/2" Punch - it won't go far in enough.

Place stamped front image on to card front. Lightly mark with a pencil the circle. Then punch with 1-3/4" punch (as shown on right photo below).

Using a pencil (I've used a pen so it will show up), mark opening. Adhere "eek" over penciled circle. The pencil mark will be hidden since "eek" is backed with 1-3/4" Lavender Lace. Close front of card to ensure "eek" is in the correctly centered (see right photo below).

Add Sticky tape to the back top/bottom of the 3" x 5-1/4" DS. Note: do not undo sticky tape yet. Using a punched 1-1/2" circle scrap (shown in left photo below), close card front and place circle in the "hole". Then lightly mark with a pencil and punch out. Remove top 3" x 5-1/4" DS sticky tape, adhere to card inside. Position the "moving" parts (this is the 3-1/4" x 2-1/2" solid CS pieces). Follow Jan Tink's video for this part of assembly. Lightly use a pencil to mark the horizontal line for the "moving" parts. Be sure to punch the "moving" part edge with the 1-3/4" punch.

With the "moving" part back underneath the DS, use a pencil to lightly mark the center of 1-3/4". Use a stamp-a-mah-jig to correctly position the stamped image -(eek - it just fits!).

Now these pieces can be returned underneath the DS - be sure to align them with the marked horizontal line that was made.. Remove sticky tape from the bottom of the inside DS. Then remove the sticky tape from the sides of the "moving: parts. Close each side of the card front. Adhere "Trick or Treat Message" inside. Adhere ribbon with mini glue dot outside card.
YOU'RE DONE! CONGRATULATIONS!
Supplies:
  • Stamps: Eat, Drink & Be Scary, Sweet Centers, Holiday Best (level 1 Hostess)
  • CS: Cast-a-Spell DS, Lavender Lace, Dusty Durango, Whisper White
  • Ink: Black, Dusty Durango
  • Accys: 1-1/2" Circle Punch, 1-3/4" Circle Punch, Stampin' Write Pens: Old Olive, Dusty Durango, Black, Dimensionals, Sticky Tape, 5/8" Old Olive Grosgrain Ribbon, Mini Glue Dot

Thank you for visiting today. I hope you enjoy my version of this magical marquee card...........hugs....XOXO

Sunday, September 6, 2009

OMG - It's Good to be back!

OMG - My computer hard drive did a crash. Everything on my computer was lost so thank goodness my Blog is not on my drive! My computer had been "hospitalized" and finally is at least backup and running. Recovery is SLOW! I am having to reload my programs and slowly trying to get back up to speed to be re-establish. Thank you for your continued patience..........this is quite a challenge! I will be posting soon!

Thanks for your continued visits!

Tuesday, September 1, 2009

Holiday Tags

This "Delightful Decorations" stamp set is part of the Holiday Mini catalog TODAY Sept. 1 release! Cool AND a punch to go with the stamp, too! No hand cutting: Yippee! The tags are part of the SU Exclusive die: "Two Tags" . The Gift tag is pre-slit and pre-scored. The longer tag which also can be a book mark has the "stitching lines" along the tag.

Here is a closer look at the Book mark: The ribbon - Yup, also available as of Sept. 1: it's called "Ribbon Originals: Mistletoe" Like the Rhinestone Brad?

Here's the stamped ornament using the great ornament punch with a rhinestone square brad. Like the ornament hanger: it's a paper clip. Use wire cutters to cut paper clip in half and secure to ornament with dimensionals. Finish with a single knotted white taffeta ribbon.

Back of book mark. Thread ribbon through punched (Horizontal Slot) Ooops, my stamped mistake shows through.....I turned the white card stock over and re-stamped it (that's what you are suppose to do, right?)

Here's the tag: Love the Jumbo Eyelet with a punched circle back. The stamped ornament is also using the new Ornament Punch and a paper clip for the hanger. There is a Rhinestone brad on top of the "O" in "JOY". The "to/From:" tag is punched using the Modern Label punch but I decided to cut the "tips" at the right side. Both the Ornament and tag are attached using dimensionals. Stamp the snowflakes using Versamark Ink.

Here's a closer look at the ornament:

Open the tag and inside is a message stamped in Old Olive ink. See the pre-cut slit? The inside is cut 2-1/2" X 1-3/4" with the corners punched with the 1/16" corner rounder.

Supplies:
  • Stamps: Delightful Decorations, Christmas Punch (level 2 Hostess), Sweet Season, Short & Sweet
  • CS: Old Olive, Kraft, Whisper White, Real Red
  • Ink: Old Olive, Versamark, Real Red
  • Accys: SU Exclusive Sizzix Two Tag Die, Crop-o-dile, Jumbo Eyelets, 3/4" Circle Punch, new Ornament Punch, Modern Label Punch, Scallop Punch, 1/16" Corner Rounder, Horizontal Slot Punch, new Ribbon Originals Mistletoe Ribbon, White Taffeta Ribbon, Dimensionals, Piercer, Rhinestone Brads, Fire Square Rhinestone Brads.

Enjoy and thank you for your visit today..................